Arcus A554 Light Tan FS30279 acrylic paint - Desert camo together with Sand FS 33711, Brown FS 30140 (EA-6).
- Camouflage scheme Aggressors Sand - camouflage together with Tan FS 30400, Brown FS 30140 (F-16).
- Camouflage scheme Desert Aggressors - camouflage together Brown FS 30140 (F-15, F-16).
- Camouflage scheme Aggressors "MIG-29" - camouflage together with Red Earth FS 30117 (F-18) When painting with a brush:
Before work, the paint must be thoroughly mixed. The paint is ready to use directly from the bottle. If necessary, the paint can be diluted with water or a water-alcohol mixture. For use with an airbrush:
Before applying the paint, it must be prepared for use, open the bottle and thoroughly mix its contents. Then dilute the paint with water or a water-alcohol mixture in a special container (outside the airbrush) in a ratio of approximately 50/50. After that, mix the paint thoroughly and now it is ready to be used in the airbrush. The recommended air pressure for an airbrush is 10-20 psi. The best adhesion to the plastic model is achieved on primed surfaces. The paint dries quickly to a matte surface (10-15 minutes). After complete drying (which can take up to 2-3 hours), the surface becomes waterproof and durable. All colors can be mixed with each other. Storage conditions
The paint is kept in a hermetically sealed container at room temperature. During storage, it is necessary to strictly observe the temperature regime, and avoid low temperatures (up to +5°C)
