Powerful single-cylinder compressor Fengda AS18-2S with forced cooling. One fan blows the cylinder, thus protecting the compressor from overheating. The compressor performance of 20-23 l/min makes it possible to work with airbrushes with a nozzle diameter from 0.15 to 0.5 mm with the upper location of the tank. A reducer with a manometer is installed at the compressor outlet, which allows you to adjust the pressure from 0 to 4 atm. In addition, the compressor is equipped with a moisture filter that prevents unwanted moisture from entering the work. The compressor is equipped with an auto-stop/auto-start function, which will ensure gentle operation. The compressor has a thermal protection function. For ease of transportation, the compressor is equipped with an ergonomic handle. To smooth out small vibrations, the compressor is equipped with special anti-vibration feet. Characteristics:
Voltage/frequency: 220-240 V / 50 Hz, 110-120 V / 60 Hz, 220 V / 60 Hz
Air consumption per minute: 20-23 l/min
Hitchhiking: 4 atm
Autostart: 3 atm
The size of the outlet fitting is 1/8"
Hose: not included Operate the compressor in a dry, clean, well-ventilated area. Follow the recommendations when working with the compressor (20-30 minutes of continuous operation, 15 minutes of break). For ease of use, you can also equip the compressor with a hose, quick-disconnect connection or adapters, if the airbrush has a non-standard outlet. Also for airbrushing, special stands for airbrushes and containers for washing airbrushes are very popular.