Fengda AS-186S is a single-cylinder oil-free compressor for airbrushing, distinguished by its silent operation. The compressor has an auto-stop system when the system pressure is 4 bars and auto-start — when the pressure drops to 3 bars. A reducer with a manometer is installed at the output of the compressor, thanks to which you can adjust the pressure required for work. In addition, a moisture separator filter is installed to eliminate the possibility of moisture getting into the airbrush and, therefore, into the work. Due to the presence of a receiver with a volume of 3 liters, the air line will be stable, smooth, without any pulsations. The compressor shows itself well when working with airbrushes with any location of the tank (top, bottom, side) and diameters ranging from 0.15 to 0.8 mm. This model has a productivity of 20-23 liters per minute. A distinctive feature of the model will be the presence of a forced cooling system. Suitable for work at home. It is used in the following areas of airbrushing: modeling, airbrushing on canvas, interior work, restoration work, confectionary art, body art, etc. Compressor operating modes:
Automatic pressure adjustment: The lower limit is 3 bar
The upper limit is 4 bars
Manual pressure adjustment at the outlet: The lower limit is 0 bar
The upper limit is 4 bars Characteristics of the compressor:
Type: single-cylinder, oil-free
Productivity: 20-23 l/min
Maximum pressure: 4 bars
Autostart/autostop function: 3 / 4 bars
Voltage: 220-240 V
Frequency: 50 Hz
Removable filter-moisture separator assembly with reducer and pressure gauge: 1 pc
The possibility of manual adjustment at the output: 0-4 bars
Receiver: 3 l
Availability of an emergency air release valve: yes
Outlet with external cut: 1/8”
Hose: Not included in the kit
Model: AS-186S
Brand: Fengda
Country of manufacture: China Operate the compressor in a dry, clean, well-ventilated area. Follow the recommendations when working with the compressor (20-30 minutes of continuous operation, 15 minutes of break). For ease of use, you can also equip the compressor with a hose, quick-disconnect connection or adapters, if the airbrush has a non-standard outlet.
