Applying varnish has long been one of the biggest problems for fashion designers. Many have ruined several models by using poor quality or inappropriate varnishes for the job, and the fact is that the varnishing process is an extremely important stage of the assembly. For the first time, AMMO is releasing a complete range of varnishes for winning results on every model. These acrylic varnishes will allow you to get the best results with both brush and airbrush in a very simple way. It should be used in thin layers and can be applied directly from the can undiluted for perfect coverage. When using an airbrush, we recommend spraying 6 inches (15 cm) from the surface. It is non-toxic and odorless and dries completely in 24 hours. This new range of polishes has been carefully developed over a long period to guarantee the perfect result every time. Don't risk it, use LUCKY VARNISH, a winning product that will eliminate any accidents that can happen when using ordinary varnishes. Available in all common finishes used in scale modelling, from high gloss to dead flat. Easy to use and clean. Incredible transparent coatings for all your models and accurate for all objects. Does not turn yellow and does not change color. Ideal for both brush and airbrush. 1- Using an airbrush, apply in light and short passes under 1.2 bar (17 psi) air pressure, avoiding build-up. 2- Let dry for at least 5 minutes between coats. DO NOT flood the surface. 3- Allow to dry completely for 12 hours. Does not require thinning. Clean with acrylic solvent A.MIG-2000 or water
