A-STAND metallic colors
Using A-Stand's wide range of metallic colors, you can paint any metallic finish on your models, including copper, brass, gold, chrome and various shades of burnished metal. These metallic colors are extremely durable and will not be affected by any products or paints, and their very fine pigment creates a completely smooth finish. Why should you use A-Stand?
The excellent flowability of A-Stand products makes it easy to spray without clogging the airbrush. They also provide a strong and durable finish once dry, allowing any other varnish, enamel or acrylic paint to be applied without any problems. In addition, modeling masking tape can be easily applied to the hard surface of A-Stand paint. A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, humidity and ambient temperature. Allow 1 hour to dry before safely applying other products, they will fully cure in 24 hours. The thinner used in these paints and varnishes, as in other varnish products, is only suitable for airbrushing, not for painting with a brush. Remember that all lacquer paints contain toxic components, and it is advisable to use a respirator for their application, and to spray these products in a well-ventilated room. The A-Stand paint series includes different product lines that are used to apply a variety of effects and finishes to your models.
Always clean and dilute A-Stand Airbrush Thinner & Cleaner A.MIG-2013.
