Collected model 1/350 Japanese battleship Musashi Tamiya 78031

[The legendary giant battleship symbolizing the Japanese navy] The giant battleship Yamato, which demonstrated the high level of Japanese shipbuilding technology to the world, was laid down at the Wu Naval Arsenal in November 1945 and completed in December 1945. The length of the water line is 256 m, the maximum width is 38.9 m, the volume of drainage is about 70,000 tons, 9 guns with a diameter of 46 cm are installed. The dimensions and armament were at that time the largest and most powerful in the world. The maximum flight range of the gun was 41 km, and the power of firing through armor plate 43 cm thick at a distance of 30 km. On the other hand, from the point of view of defense, about 21,000 tons of defensive armor plate, which is 30% of the standard volume of drainage Use. The total length of the ship is shortened as much as possible, and a centralized defense method is used to achieve high defense strength, which collects important parts such as the bridge, turret and engine part. In addition, the most characteristic underwater form is Barbasa's bow on the nose. Spherical bow that hangs 3m forward reduces wave resistance when combined with other swords. Implements a ship shape with excellent propulsion efficiency. These technologies are used in post-war Japan. It is a legacy of world shipbuilding. Yamato, which participated in the offshore battles of Midway and Leyte and reigned over the Pacific Ocean, was a special naval attack unit as a result of Operation Tenichi (Operation Kikusui) on 7 April 1945. En route to Okinawa, it was attacked by more than 300 US Navy aircraft and finally sank at sea.

This is a kit for assembling a plastic model of the battleship Yamato of the Japanese Navy, which was the strongest in the world at the time of World War II. ● Scale 1/350. Made in large sizes with an overall length of 751.5mm and an overall width of 110mm. The answer is also enough. ● The integrally molded body realistically modeled such unique styling as the wide upturned nose and the strongly protruding barbel bow shape. ● Body including bridge and chimney Accurately reproduce the superstructure located in the center in the center. You will be able to enjoy the deep atmosphere of Yamato. ● The No. 2 type 1 radio wave detector and the main mast at the top of the bridge are finely engraved. -The watertight cover at the base of the gun body is also realistically expressed with a triple main turret of 45 caliber 46 cm. The finished turret can be attached to the deck from above. ● Dual 60 caliber 15.5 cm 3 secondary guns and dual 12.7 cm 40 high-angle guns, dual 25 mm Weapons such as machine guns are also sharply machined. ● The signal flag yard at the top of the bridge faithfully reproduces the shape of each yard. ● Main turret, secondary turret, 15m range finder and stern crane move even after completion. - The walking area of the aft flight deck is represented by a sticker. - The seat of the machine gun is also reproduced on the stern. - Two Zero Type Surface Surveillance Aircraft and two Zero Type Reconnaissance Aircraft are available. A display stand is also installed, which can be easily fixed with screws on the 1/350 showcase (with wooden pedestal).

glue and paint are not included